20.2 To Remove Pressure Gauge
2. Remove 4 screws to remove
the Connecting bar.
1. Remove 3 screws to remove
the Particular Plate.
20.3 To Remove Remote Control
1. Remove the top case from the bottom case.
Insert the
driver and
slightly turn.
Flat-blade
screwdriver
Bottom
case
3. Use spanner to release nut
of Pressure Gauge.
3. Remove 3 screws then take out the bottom case.
Disconnect the
remote controller
wiring
2. Disconnect the Remote Controller wiring.
239
Claw
(2 places)