Basic Copy And Swap Operations; Copy And Swap - Sony DVS-9000 User Manual

Basic Copy and Swap Operations

Copy and Swap

You can carry out copy and swap operations by using the menus.
Accessing the Copy/Swap menu
In the menu operation section top menu selection buttons, press the [Copy/
Swap] button.
Here a copy/swap operation on wipe data is described by way of example,
using the Copy/Swap>Wipe menu, but the same general procedure applies to
all of the following menus.
• M/E: Copying and swapping M/E data
• Key: Copying and swapping key data
• Wipe: Copying and swapping wipe data
• DME Wipe: Copying and swapping DME wipe data
• Matte: Copying and swapping matte data
• Color: Copying and swapping color data
• DME: Copying and swapping data by DME channels
For an overview of the concepts involved, see "Copy and Swap" (page 66).
Copying and swapping wipe data
As an example, to copy or swap wipe data, use the following procedure.
1
2
3
286
Basic Copy and Swap Operations
In the Copy/Swap menu, select HF2 'Wipe.'
The Copy/Swap>Wipe menu appears.
The status area shows lists for the copy/swap source on the left, and the
copy/swap destination on the right.
In the <Data Select> group, select any of the following.
Wipe: The operation applies to wipes in the transition control block.
Key Wipe: The operation applies to wipes in the independent key
transition control block.
Using any of the following methods, select the data to be copied or
swapped.
• Press directly on the list appearing in the status area.