Sony DVS-9000 User Manual page 274

1
2
3
Selecting the way in which images are combined
To select the way in which the memory image and input signal are combined
(see page 63), use the following procedure.
1
2
3
274
Frame Memory Operations
Press [Store].
The keyboard window appears.
In the keyboard window, enter the file name (maximum 8 characters).
In the keyboard window press the [Enter] button.
This saves the freeze image as a file in memory.
In the Edit>Composite menu, press [Composite Adjust].
The Composite Adjust menu appears.
Note that to preview the composite image on the monitor screen, in this
menu <Output> group, select [Memory Input].
In the <Type> group, select one of the following methods of combination.
• Pattern Key: pattern key
• Ext Key: external key
(Can only be selected when "V/K MODE" is on.)
• Mix: mix
Note
In the Input Mask menu, if "Sub Mask" is on, when you select a pattern
key, external key, or mix, "Sub Mask" goes off. Again, if any of these is
selected when you turn "Input Mask" on, any combination method
selected in the <Type> group is deselected.
• NAM: non-additive mix
If none of the above is selected, image combination is not carried out.
Depending on the selection in step 2, make the required settings.
• When pattern key is selected
Press [Pattern Select] to display the Composite Adjust>Pattern Select
menu, and carry out pattern selection.
Press any pattern from those displayed (standard wipe patterns 1 to 24) to
select it, then adjust the following parameters.
Knob Parameter Adjustment
1 Size Size of pattern
Setting values
0.00 to 100.00