Sony DVS-9000 User Manual page 245

color matte or a two-color combination in the <Edge Matte> group.
Flat Color: Adjust color 1 with the following parameters.
Knob
1
2
3
When you select Mix Color for a two-color combination, see the next
paragraph.
Carrying out a color mix for the edge fill matte
When you selected [Matte] for the border or soft border edge fill, you can
combine color 1 and color 2.
For the combination, you can use not only a normal wipe generator pattern, but
also the dedicated color mix pattern.
Use the following procedure.
1
In the <Edge Fill> group of the Edge/Direction menu , select [Matte], and
press [Matte Adjust].
The Matte Adjust menu appears.
2
In the <Edge Matte> group, select [Mix Color], turning it on.
3
In the <Mix Pattern> group, make one of the following selections.
Wipe: Use the wipe pattern selected for the transition.
Pattern: Use the dedicated pattern.
4
Depending on the selection in step 3, set the following parameters.
• When Wipe is selected
Knob
1
2
• When Pattern is selected
Knob
1
2
3
a) The patterns are the same as for a standard wipe. See the appendix "Wipe Pattern List"
(Volume 2).
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Size Pattern size
Soft Edge softness
Parameter Adjustment
Size Pattern size
Soft Edge softness
Pattern Pattern number
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 359.99
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24
Basic Procedure for Wipe Settings
245