Sony DVS-9000 User Manual page 128

• Shift Mode: Specify whether the rightmost button of the AUX delegation
buttons is used as a shift button, and when it is used as a shift button, the
operating mode.
External device connections (Device Interface)
• GPI Input: Set the GPI input ports and trigger type, and make the action
settings.
• GPI Output: Set the GPI output ports and trigger type, and make the action
settings.
• P-BUS Control: Set the control mode for P-BUS devices.
Operation settings (Operation)
• Button Tally: Set whether or not the system tally generation results are
reflected in the panel tally.
• Effect: For keyframe effects, you can make the following settings. (See
Chapter 13 "Keyframe Effects" (Volume 2). )
• Source/Dest Name: For the Source/Dest (source/destination) names used by
the system, select one of the following:
• Name Display: Specify the number of characters for display of the names
selected in Source/Dest Name above, as two characters, four characters, or
Auto.
• Custom Button: Set the following button operating modes.
• Main Split Fader: When the split fader is active, specify whether the fader
to control other than mix is the left side or the right side.
Screen saver, brightness adjustments, and alarm (Maintenance)
• Screen Saver: Make the menu screen saver settings.
• LCD Brightness: Adjust the LCD brightness.
• LED Brightness: Adjust the LED brightness.
• Switch Brightness: Adjust the switch brightness.
• Touch Beep: Select whether or not to sound a beep when a menu operation
is carried out.
128
Setup
• Recall mode
• Effect Auto Save
• Source name set by cross-point assignment or fixed bus name
• Description name set on routing switcher
• "Type + No." name set on routing switcher
• [ALL] button for next transition selection
• [AUTO TRANS] or [TAKE] button during auto transition execution
• [UTIL1] and [UTIL2] buttons
• [TRANS PVW] button
• [XPT HOLD] button in the key row