Sony DVS-9000 User Manual page 246

5
246
Basic Procedure for Wipe Settings
If you selected Pattern, you can also carry out the pattern selection by
pressing the [Mix Ptn Select] button in the Matte Adjust menu, to display
the Mix Ptn Select menu. Select any pattern appearing in the Mix Ptn
Select menu (standard wipe patterns 1 to 24) by pressing the appropriate
button, and you can then adjust the following parameters.
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Edge softness
If you selected Pattern in step 4, if required, the following modifiers can
be added. After selecting a wipe mix, skip to step 6.
• When turning [Position] on and setting the pattern position
Knob Parameter Adjustment
1 Position H Horizontal position
2 Position V Vertical position
a) See page 51.
• When turning [Multi] on and using replications of the same pattern
Knob Parameter Adjustment
1 H Multi Number of repetitions of pattern
horizontally
2 V Multi Number of repetitions of pattern
vertically
3 Invert Type Replication layout
a) See page 53.
• When turning [Aspect] on and setting the aspect ratio of the pattern
Knob Parameter Adjustment
1 Aspect Aspect ratio
a) See page 53.
• When turning [Angle] on in the <Rotation> group and slanting the
pattern
Knob Parameter Adjustment
1 Angle Angle of pattern rotation
a) See page 51.
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
200.00 to 200.00
a)
200.00 to 200.00
Setting values
1 to 63
1 to 63
a)
1 to 4
Setting values
a)
100.00 to +100.00
Setting values
a)
100.00 to +100.00