Sony DVS-9000 User Manual page 75

Limits of three-dimensional parameters
The following table shows the limits of three-dimensional transformation
parameters.
The three-dimensional parameters of an image change when you use the
trackball or Z-ring to execute a transformation. You can also execute a
transformation by entering parameter values from the numeric keypad control
block.
Operation mode
Location XYZ
Rotation, Spin
Axis Location
Location Size
Aspect
Perspective
Skew
Detents
The system defines points called detents at regular intervals on the three-
dimensional space. Pressing the [CTR] button in the device control block sets
the current three-dimensional parameter values to the closest detent points.
(For details, see "Three-Dimensional Transformation Operations" in Chapter
11 (Volume 2).)
The following table shows the interval between successive detents for each
transformation operation mode (see page 76).
Operation mode
Location XYZ
Rotation, Spin
Axis Location
Location Size
Aspect
Perspective (x, y)
Perspective (z)
Skew
Values for x-, y- and z-axes (16:9 mode)
Limits of three-dimensional transformation parameters
333.3333 to +333.3333
999.9999 to +999.9999
333.3333 to +333.3333
0.0000 to +999.9999
0.0000 to +2.0000
Perspective (x, y)
33.3333 to +33.3333
Perspective (z)
0.0000 to 999.9999
3.3333 to +3.3333
Detent interval
1.00
0.25
1.00
0.25
a)
1.00
1.00
a)
1.00
0.10
Digital Multi Effects (DME)
75