Masks - Sony DVS-9000 User Manual

Selecting a normal edge
When all five edge type selection buttons are off, a normal edge is selected. If
one of the buttons is lit, press it, turning it off.
Softening the edge
Press the [SOFT EDGE] button, turning it on. The button lights green, and you
can now adjust the softness with knob 1.
Knob
1
• For a normal edge, when [SOFT EDGE] is enabled, "Key Drop" mode turns
on.
• When a luminance key or linear key is selected as the key type, and clean
mode is enabled, enabling [SOFT EDGE] ends the clean mode.
Applying the zabton effects
When the [ZABTN] button is lit green, adjust the following parameters.
Knob
1
2
Press the [MORE] button lit amber, changing it to green, then adjust the
following parameters.
Knob
1
2
3
4

Masks

Using the main mask
In the key control block, press the [MAIN MASK] button, turning it on. The
parameter settings depend on the mask source selected as [Box] or [Pattern] in
the <Mask Source> group of the Main Mask menu for the key.
Parameter Adjustment
Soft Edge softness
Parameter Adjustment
Size Pattern size
Soft Pattern edge softness
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Density Density
Setting values
0 to 100
Setting values
0 to 100
0 to 100
Setting values
0 to 100
0 to 100
0 to 359
0 to 100
Key Setting Operations With the Key Control Block
231