Sony DVS-9000 User Manual page 177

To change the keys and background presets in Setup menus
simultaneously: Press the [ALL] button.
To allocate a particular next transition button to the [ALL] button
function, see "Operation Settings (Operation Menu)" in Chapter 16
(Volume 2).
3
For the transition to change the key priority, set the priority for after the
transition.
For details of the key priority, see "Selecting the key priority" (page 25).
For details of the key priority setting operation, see "Key Priority Setting"
(page 179).
4
Select the new video used for the transition.
• In the background B row of cross-point buttons, select the new
background video.
• When inserting a key, select the key signal, and make any required
settings.
For details of key settings, see Chapter 4 "Keys" (page 199).
To carry out a cut transition, skip to step 7; otherwise continue to step 5.
5
Select one of the transition type selection buttons in the transition control
block.
To carry out a dissolve to the new video: Press one of the [MIX],
[NAM], [SUPER MIX], and [PST COLOR MIX] buttons, turning it
on.
To carry out a wipe: Press the [WIPE] or [DME] button, turning it on.
You can also use the Misc>Transition menu to select a desired transition
type for the M/E or PGM/PST bank. (See "Selecting the Transition Type
by a Menu Operation" (page 184).)
For an overview of the transition types, see "Transition Types" (page 30).
6
Make the required settings, according to the selected transition type.
For details of the settings, see the relevant section.
Super mix: "Super Mix Settings" (page 185)
Preset color mix: "Color Matte Settings" (page 186)
Wipe: "Basic Procedure for Wipe Settings" (page 238)
DME Wipe: "Basic Procedure for DME Wipe Settings" (page 260)
Basic Operating Procedure
177