Sony DVS-9000 User Manual page 215

1
In the <Edge Fill> group of the Edge menu, select [Matte], then press
[Matte Adjust].
The edge fill Matte Adjust menu appears.
2
In the <Edge Matte> group, select [MixColor], turning it on.
3
Adjust the following parameters.
Knob Parameter
1 Size
2 Softness
3 Pattern
a) The patterns are the same as standard wipes. (For details, see the appendix "Wipe Pattern
List" (Volume 2).)
To select the pattern, display the Mix Pattern Select menu by pressing
[Mix Pattern] in the edge fill Matte Adjust menu. After selecting one of the
patterns (standard wipe patterns 1 to 24) displayed in the Mix Pattern
Select menu, you can adjust the following parameters.
Knob Parameter
1 Size
2 Softness
4
Adjust color 1 and color 2.
To adjust color 1 press [Color 1], and to adjust color 2 press [Color 2],
turning it on respectively, and adjust the following parameters.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
5
If required, set the pattern modifiers.
• When turning [Position] on and setting the pattern position
Knob Parameter
1 Position H
2 Position V
a) See page 51.
Adjustment
Pattern size
Softness of pattern edge
Pattern number
Adjustment
Pattern size
Softness of pattern edge
Adjustment
Luminance
Saturation
Hue
Adjustment
Horizontal position
Vertical position
Key Setting Operations Using Menus
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 359.99
Setting values
a)
200.00 to +200.00
a)
200.00 to +200.00
215