Sony DVS-9000 User Manual page 243

The following sections show examples of modifying the main pattern.
Specifying the wipe direction (Direction)
You can specify the wipe direction (normal/reverse).
To specify the wipe direction in a menu
Use the following procedure.
1
In the M/E-1> Wipe menu, select HF4 'Edge/Direction.'
The Edge/Direction menu appears.
2
In the <Direction> group, specify the wipe direction.
Normal: regular direction
Normal/Reverse: alternate between regular and reverse for each transition
Reverse: reverse direction to normal
To specify the wipe direction with a button in the transition control
block
In the transition control block of each of the M/E-1 and PGM/PST banks, press
the following direction selection buttons.
NORM: Normal
NORM/REV: Normal/reverse
REV: Reverse
Splitting the wipe pattern
Use the following procedure.
1
In the M/E-1 > Wipe menu, select HF4 'Edge/Direction.'
The Edge/Direction menu appears.
2
Presss [Split], turning it on.
3
Set the following parameters.
Knob
1
2
Modifying the wipe pattern edge
Use the following procedure.
Parameter Adjustment
Split No. Number of splits
Spacing Spacing between adjacent
patterns
Setting values
1 to 4 (integer)
0.00 to 100.00
Basic Procedure for Wipe Settings
243