Sony DVS-9000 User Manual page 251

2
In the <Pairing> group, select the slit direction.
H: Create slits in the horizontal direction.
V: Create slits in the vertical direction.
3
Set the following parameters.
Knob
1
2
3
a) See page 54.
Applying modulation to the wipe pattern (Modulation)
You can apply modulation independently to the main pattern and sub pattern.
Use the following procedure.
1
In the M/E-1>Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
Depending on the desired effect, in the <Modulation> group select one of
the following.
H: Modulate the pattern, applying waviness in the horizontal direction to
edges.
V: Modulate the pattern, applying waviness in the vertical direction to
edges.
Fringe: Modulate the pattern, applying waviness in the radial direction to
edges.
3
Set the following parameters.
.
Knob
1
2
3
4
a) See page 55.
b) See page 55.
Parameter Adjustment
Width Width of the slits
H Offset Spacing in the horizontal direction
V Offset Spacing in the vertical direction
Parameter Adjustment
Amplitude Amplitude of modulation
Frequency Frequency of modulation
Speed Speed of waves
Shape Form of the modulation
Setting values
1 to 128 (integer)
100.00 to 100.00
100.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
100.00 to +100.00
b)
1 to 3
Basic Procedure for Wipe Settings
a)
a)
a)
251