Fig. 28 Io-Link Port Settings - Beckhoff KL6224 Documentation

KS2000 Configuration Software
IO-Link port settings
In the General dialog click on Settings for the required port.
Fig. 28: IO-Link port settings?
StartUpChecks
This parameter can be used to specify that the vendor ID and the device ID should be checked when the IO-
Link device starts up.
CycleTime
Specifies the cycle time for the IO-Link master
Communication mode
An IO-Link device can be operated in different modes. The default mode for IO-Link devices is
Communication.
Error reaction
If this checkbox is checked, the input data are set to 0 in the event of an error.
Advanced
Click on [Advanced] to open the dialog for the advanced settings.
32 Version: 2.0.0 KL6224