Table of Contents
Advertisement
Support Tray
1. When not in use, the support tray may be stored
in the slot (A) located in the upper back corner of
the frame.
It may be installed into the storage slot from
either side.
2. Loosen the lock lever and insert the mounting bar
into the lower bearing block while guiding the
support plate over and around rolls.
3. Align the opening in the support plate over the
rolls. This is typically to be centered. Do not allow
the rolls to rub on the support plate.
4. Tighten the lock lever to hold the support tray in
position.
A
D
18
18
C
B
Advertisement
Table of Contents
