TECHNICAL SPECIFICATIONS
This bead roller is power driven and will form sheet metal up to 16 Gauge thickness mild steel
(or equivalent). Available die sets allow for the following operations to be performed: wiring,
edging, ogee bead, single bead, and elbow edging.
Capacity, Mild Steel
Capacity, Aluminum
Throat Depth
Arbor Diameter
Standard Roll Diameter
Power
Motor HP
Shipping Dimensions (L x W x H)
Weight
Inverter driven variable speed foot pedal control
Forward and reverse rotation
Left or right hand operator controls
Quick release top roll
Adjustable depth on bottom roll
Depth stop included
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
16ga. (.0598") (1.52mm)
14ga. (.0641") (1.63mm)
36" (914mm)
.875" (22mm)
2.5" (63.5mm)
110VAC, 60hz
1/2hp (.37kw) 220V, 3ph
60" x 44" x 68" (1524 x 1118 x 1727mm)
300lbs. (137kg)
8
8