Description Of The Powder Parts - EMS AirFlow S1 Service Manual

AirFlow S1
®
Polisher connector
Polisher handpiece
Powder bowl set
12

Description of the powder parts

The powder circuit is used on the AirFlow
powder circuit is made by a transparent hose.
The powder comes from the powder bowl and passes
through the pinch valve allowing the stop of the flow, and
goes into the polisher handpiece via the handpiece cord.
Pinch valve
system. The
®
Powder bowl set
Polisher handpiece cord
Polisher
handpiece cord
Polisher Polisher handpiece
connector
Pinch valve