Description Of The Pneumatic Parts - EMS AirFlow S1 Service Manual

AirFlow S1
®

Description of the pneumatic parts

AirFlow S1 unit is driven by a pneumatic footswitch. Internal air
®
circuit is made by yellow hoses.
It is equipped with an air filter at the entrance of the air supply.
The air passes through a regulator allowing the regulation of the
flow, and goes into the a set of two air filters before its entrance
into the powder bowl.
The pneumatic module for polisher, the pinch valve and the water
circuit are driven by the air circuit.
Air filter
Pneumatic module
for polisher
Electrovalve
Air regulator
Powder bowl set
Air supply
Pinch valve
Footswitch
Electrovalve
Air regulator
Powder bowl set
Air filter Air filter Air filter
Footswitch
Pneumatic module for polisher
Pinch valve
See water circuit
11