Fig. 43 Enabling The Ads Interface On The Dp Master - Beckhoff FC3102 Documentation

FC310x as slave
ADS Interface from TwinCAT 2.9
Communication can also take place via ADS in TwinCAT systems. The functionality is extremely similar to
that of an ADS connection between two PCs over Ethernet, although transmission takes place over
PROFIBUS, with the exception that the requester that initiates the ADS job is always the DP master PC. An
FC310x DP master is then linked to an FC310x-DP slave.
In the DP master, the ADS Interface should be activated on the ADS tab of the box, and the Net-ID of the
DP slave PC is to be entered:
Fig. 43: Enabling the ADS interface on the DP master
For the DP slave, the Net-ID of the DP master PC should be entered under Add. NetIDs in the ADS tab of
the device:
FC3101 and FC3102 Version: 3.0 67