Fig. 30 Twincat 2.9 - Ads Tab - Beckhoff FC3102 Documentation

FC310x as master
To-Time: If the checkbox Set To on Box is not ticked, the To-time can be set to the same value for all
slaves.
Ti-Time: If the checkbox Set Ti on Box is not ticked, the Ti-time can be set to the same value for all slaves
Estimated Equi-Cycle Time: Shows the DPV2 part of the expected PROFIBUS cycle time.
Calculate MC-Times: This button can be used to calculate all DPV2 times automatically
Sync-Mode: The Sync-Mode decides whether the FC follows the PC (disabled) or whether the PC follows
the FC (master), in order to synchronize the TwinCAT cycle with the PROFIBUS cycle
3.8.2.5 ADS tab
The FC310x is an ADS device with its own Net-ID, which can be changed here. All ADS services
(diagnostics, acyclic communication) going to the FC310x must address this Net-ID.
Fig. 30: TwinCAT 2.9 - ADS tab
FC3101 and FC3102 Version: 3.0 53