Graco LineLazer V 200MMA Operation - Repair - Parts page 15

12. Digital display is functional after engine starts.
13. Mix BPO catalyst with component B per manufac-
turer's recommendation.
14. Place siphon tube in component B pail and drain
tube in separate waste pail.
15. Set B side pump ON/OFF valve to ON (pump is now
active).
16. Increase pressure control enough to start pump.
Pump is primed when fluid flows from drain tube.
3A6466A Operation, Repair, Parts
17. Turn pressure down, turn prime valve to spray.
18. Return drain line to component B pail.
19. Engage piston safety lock.
20. Open B side fluid valve (about three full turns).
ti28017a
21. Disengage piston safety lock.
15s
ti28016a
Setup/Startup
TI2410A
15