Adjusting Force Of The Pressure Of Roller Conditioner - SaMASZ KDF 301 W Operator's Manual

Removal of the flail consists of unscrewing the nut using a flat and removing the flail.
Installation of the flail is accomplised by revering these steps.
1. Conditioner roller
2. Flail
3. Bolt M16x60, Property Class 10.9
4. Self-locking nut M16 zinc plated,
Property Class 8
5. Key
5

6.6. Adjusting force of the pressure of roller conditioner

(Models: KDF W)
With factory set rollers, a ridge on one roller should enter a groove on the other. Clearance
between a ridge and a groove on rollers should be within 0.08''-0.2''. The clearance can be adjusted
by a bolt U.
If need be, the force of the roller conditioner's pressure can be regulated by changing
the tension of springs S (Fig. 26) by means of the nut N. Adjustment should be done on both sides
of the conditioner.
Operator's manual
3
6
4
7
2
Fig. 25. Replacing (light-weight) conditioner flails
Fig. 26. Adjusting force of the pressure of roller conditioner
Front disc mowers
5
Fig. 24. Parts of tine conditioner
1
1. Conditioner roller
2. Flail
3. Bolt M12x55, Property Class 8.8
4. Self-locking nut M16 zinc plated, Property
Class 8
5. Key
6. Flail's insert
7. Flat washer
U N
S
- 29 -
KDF
4
2
3
2
1