Adjusting Force Of The Pressure Of Roller Conditioner - SaMASZ KDF 260 Operator's Manual

Removal of the flail consists of unscrewing the nut using a flat wrench, removing the bolt and
removing the flail. Installation of the flail is accomplised by revering these steps (Fig. 24 and Fig.
25).
1. Conditioner roller
2. Flail
3. Bolt M16x60, Property Class 10.9
4. Self-locking nut M16 zinc plated,
Property Class 8
5. Key 10x8x50
5
Fig. 25. Replacing (light-weight) conditioner flails
6.6.

Adjusting force of the pressure of roller conditioner

(Models: KDF W)
If need be, the force of the roller conditioner's pressure can be regulated by changing
the tension of springs S (Fig. 26) by means of the nut N. Adjustment should be done on both sides
of the conditioner.
Operator's manual
5
4
7
Fig. 26. Adjusting force of the pressure of roller conditioner
Front disc mowers
Fig. 24. Parts of tine conditioner
1
1. Conditioner roller
2. Flail
3
3. Bolt M16x60, Property Class 10.9
4. Self-locking nut M16 zinc plated,
6
Property Class 8
5. Key 10x8x50
6. Flail's insert
2
7. Flat washer ∅12
N
S
- 30 -
KDF
4
2
3
2
1