Table of Contents
Advertisement
If condensation exists, leave the equipment unplugged until there is no condensation.
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device in a
cupboard or another enclosed location, heed the necessary space between the set and the sides of the
cupboard.
The LCD panel becomes warm during operation. This is not a malfunction. Allow adequate air circulation
to reduce the temperature of the equipment.
Installation
•
Place the equipment on a flat, solid and stable surface that can support the weight of at least 3 units.
If you use an unstable cart or stand, the equipment may fall, causing serious injury to a child or adult
and/or serious damage to the equipment.
•
Do not allow to climb or rest on the equipment.
•
When the equipment is attached to an arm, do not use the equipment as a handle or grip in order to
move the equipment. Please refer to the instruction manual of the arm for instructions on how to move
the arm with the equipment.
•
Provide full attention to safety during installation, periodic maintenance and examination of this equip-
ment.
•
Sufficient expertise is required for installing this equipment, especially to determine the strength of the
wall, arm or ceiling suspension for withstanding the display's weight. Be sure to entrust the attachment
of this equipment to the wall to a duly skilled technician and pay adequate attention to safety during
the installation and usage.
•
The manufacturer is not liable for any damage or injury caused by mishandling or improper installation.
•
When the display is assembled in the medical system, take care of unwanted detachment.
•
The equipment should be installed near an easily accessible place. Do not install or leave the unit in
places subject to extreme temperatures, near a radiator, heating vent, or in places subject to mechani-
cal vibration or shock. Subjecting the LCD display to extreme temperatures, could cause deformations
of the casing or malfunctions.
•
Avoid to place the unit near any equipment that generates a strong electro-magnetic field, such as
surgical knife or other medical appliances.
•
Avoid places subject to inordinate amounts of dust, dirt, or sand, for example near an open window or
an outdoor exit.
•
If setting up temporarily in an outdoor environment, be sure to take adequate precautions against
airborne dust and dirt. Otherwise unrecoverable malfunctions could occur.
Handling
Do not press on or scratch the front protection screen. Do not place a heavy object on the equipment.
If the equipment is used in a cold place, a residual image may appear in the screen. This is not a mal-
function. The screen returns to normal as the temperature rises to a normal operating level.
If a still picture is displayed for a long time, a residual image may appear for a while. The residual image
will eventually disappear.
Transportation
Disconnect the cable from the equipment when transporting.
When you transport the equipment, hold it firmly in both hands. If you drop the equipment, you may be
injured or the equipment may be damaged.
When you transport the equipment for repair or shipment, use the original cardboard box and packing
materials.
K5902132 (451920612532) MUIP-2112 30/11/2017
4. Important information
17
Advertisement
Table of Contents
