Snmp; Location; Remote Ethernet Settings; Figure 5-19 Snmp - ADRF SDR-ICS-43 User Manual

5.4.2 SNMP

The SNMP section allows you to specify the Site ID, Description and Manager IP. The Site-ID is the code that is
used to identify a particular module. The Description is separate field for user. The Manager IP field is where the
user inputs the IP address of the NOC system that is being used to monitor the SNMP traps.

5.4.3 Location

This section allows the user to input the latitude and the longitude of the repeater.
5.4.4

Remote Ethernet Settings

This section allows the user to specify an alternative Repeater IP, Subnet Mask, and Gateway settings. These
settings are enabled when the Host/Remote switch is set to the Remote position.
Advanced RF Technologies, Inc.

Figure 5-19 SNMP

Figure 5-20 Location Setting

32