Rf Ports; Figure 2-6 Rf Port - ADRF SDR-ICS-43 User Manual

The SDR-ICS-43 can be connected to an ADRF-BBU (ADRF Battery Backup) to provide power during a power failure.
If an ADRF-BBU is utilized, connect the ADRF-BBU to the SDR-ICS-43 via the external battery port.
(WARNING: The circuit switch on the ADRF-BBU must be set to OFF before connecting the ADRF-BBU to the SDR-
ICS-43 to prevent damage to the repeater or the ADRF-BBU and personal injury.)
Note: Please contact ADRF Technical Support for assistance if you are unfamiliar with the installation procedure of
our battery box.
2.4

RF Ports

·
DONOR – 4.3-10 female which is used to connect the donor antenna
·
DONOR_Modem CPL (20dB) – SMA female 20 dB coupling port which is used to Modem
·
MODEM_ANT – SMA female port which is used to provide RF signal to the optional external modem box or
connect the DONOR_ CPL port.
·
SERVER_CPL (30dB) – SMA female 30 dB coupling port which is used to monitor the amplified DL signal
·
SERVER – 4.3-10 female which is used to connect the server antenna
Advanced RF Technologies, Inc.
Figure 2-5 RF port
17