Table of Contents
Advertisement
3.4
Registered ID Count
The number of registered user IDs is displayed. This count automatically increases or decreas
es as IDs are registered or deleted. The LCD above shows that the total of 1234 user IDs are
registered in the memory.
3.5
ID Memory
ID Memory allows you to decide how to divide the memory space between IDs and event tra
nsactions. The total number of IDs and event transactions combined is a maximum of 60,00
0. The default setting is 10,000 users and 50,000 event transactions. If you increase the max
imum number of IDs, the maximum number of events decreases in the same proportion, an
d vice versa. To change the memory partition setting, press <ENT>, and press <4> or <6> to s
elect 10000/50000, 20000/40000, 30000/30000, 40000/20000 or 50000/10000 (No. of ID
s / No. of Events), and then press <ENT> again to confirm.
The event memory must be emptied prior to changing this setting. If you attempt t
o change the setting with some event data still in the memory, the LCD will display
"EVENT MEMORY NOT EMPTY" error message.
If you attempt to reduce the ID memory size to a value lower than the current num
ber of IDs stored in the memory, the LCD will display the "ID TOTAL COUNT WRON
G" error message.
p.68
SETTING CHANGES
Advertisement
Table of Contents
