Table of Contents
Advertisement
2.2
Rear View
Initialization Switch
This switch is used to initialize Star 505R. For initialization, press down this switch and
then keep it more than 2 seconds. Refer to '8.2 System Initialization' for more details.
Communication Display LED
# 3, 4(yellow, green) LED will twinkle during RS232, RS422 and TCP/IP communicatio
n.
If the LAN is connected normally during TCP/IP communication, green LED will turn o
n. But in the collision status, the #2 LED (red) turns on.
Tamper Switch
If someone takes off installed Star 505R on the wall by force, this tamper switch is act
ivated then buzzer makes sound.
p.16
Product overview
Advertisement
Table of Contents
