Tcp/Ip Communication Port Connection - IDTECK 505R Series Manual

V. Plug in the RS232 9PIN connector of the converter to the COM1 or COM2 port of
the PC.
VI. Install and run Star 505R Application Software
3

TCP/IP COMMUNICATION PORT CONNECTION

Optional TCP/IP module is required to use TCP/IP communication between the Star 505R an
d the PC. Please follow the following instructions below:
1. Connect the LAN cable of the network system to the RJ45 jack of the Star 505R.
2. Set the ID of the Star 505R.
3. Install and run the Star 505R Application Software.
TCP/IP COMMUNICATION PORT CONNECTION p.35