Panasonic SF4C Series Instruction Manual page 20

Mounting
<In case of using multifunctional mounting bracket MS-SFC-3 (optional)
Step 1 Removing the M3 countersunk head screw [with anti-loosening agent (length 4mm)] which is at-
tached to the back of the device. And remove the standard mounting bracket MS-SFC-1 (accessory)
Step 2 Mount the multifunctional mounting bracket using the M3 countersunk head screw [with anti-loosening
agent (length 4mm)] (accessory of multifunctional mounting bracket). The tightening torque should be
0.3N·m.
M3 countersunk head screw
[with anti-loosening agent (length 4mm)]
(Accessory of multifunctional mounting bracket)
Step 3 Set the multifunctional mounting bracket on the mounting surface using either two hexagon-socket
head bolts [M6 (purchase separately)] or four hexagon-socket head bolts [M4 (purchase separately)].
Hexagon-socket head bolt
[M6 (Purchase separately)]
Note: SF4C-H28□ ,SF4C-H32□, SF4C-F55□ and SF4C-F63□ require multifunctional intermediate supporting bracket MS-SFC-4
(optional).
Refer to <In case using multifunctional intermediate supporting bracket MS-SFC-4 (Optional)> for the mounting method.
20
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
M3 countersunk head screw
[with anti-loosening agent (length 4mm)]
Multifunctional mounting bracket
MS-SFC-3 (Optional)
This device
This device
Hexagon-socket head bolt
[M4 (Purchase separately)]
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
This device