Applicable Standards / Regulations; Confirmation Of Packed Contents - Panasonic SF4C Series Instruction Manual

1-3 Applicable Standards / Regulations

This device complies with the following standards / regulations.
<EU Directives>
EU Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC (Valid until April 19, 2016)
EMC Directive 2014/30/EU (Valid from April 20, 2016)
RoHS Directive 2011/65/EU
<European Standards>
EN 61496-1 (Type 4), EN 55011, EN 61000-6-2, EN 50178, EN ISO 13849-1: 2008 (Category 4, PLe)
<International Standards>
IEC 61496-1/2 (Type 4), ISO 13849-1: 2006 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
<Japanese Industrial Standards (JIS)>
JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508 (SIL3)
<Standards in US / Canada)>
ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2)
CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14
<Regulations in US>
OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate.
With regard to the standards in US / Canada, TÜV SÜD, has certified for
<Regulations in Korea (Only for SF4C-H□)>
S1-G-35-2005, S2-W-11-2003
The S-mark certificate has been certified by Korea Occupational Safety & Health Agency (KOSHA).
<Reference>
The conformity to JIS, OSHA and ANSI for this device has been evaluated by ourselves.
The TÜV Mark indicates compliance with both Canadian and US requirements.
C US
This device conforms to the EMC Directive and the Machinery Directive. The
this device conforms to the EMC Directive.
mark makred on this divice shows that this divese has certified with the type examination certificate.
● In Japan, never use this device as a safety equipment for any press machine or shearing machine.
● When this device is used in a place other than the places shown above, be sure to confirm the stan-
dards or regulations applicable in each region or country before use.

1-4 Confirmation of Packed Contents

□ Sensor: Emitter, Receiver
□ Test rod
SF4C-F□: SF4C-TR14 (ø14 × 220mm), SF4C-H□: SF4C-TR25 (ø25 × 220mm)
□ Abridged Instruction Manual
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Introduction
TÜV Mark.
C US
Mark on the main body indicates that
1 pc. each
1 pc.
1 pc.
9