Information About Night Vision Mode; Wall Mounting; Adjusting The Angle - Panasonic HomeHawk KX-HN1003 Installation Manual

Appendix
Information about
night vision mode
The camera features an array of
infrared LEDs that light
automatically in low-light
conditions, allowing camera
images to be viewable even when
the surrounding area is dark.
Note:
R When night vision mode is
active, the colors in camera
images may appear different
from normal.
R When night vision mode is
active, the array of infrared
LEDs that surround the
camera's lens light up in a faint
red color that can be seen in
the dark.
R If the camera is installed in front
of a window and points directly
at the window, images may be
poor when night vision mode is
active.
26
HN1003W_(en_en)_0302_ver001.pdf
For assistance, please visit http://shop.panasonic.com/support
26

Wall mounting

Drive two screws (not supplied)
into the wall, and then mount the
unit as shown.
31 mm (1 7/32 inches)
Screws
Note:
R Make sure that the wall and the
fixing method are strong
enough to support the weight of
the unit.

Adjusting the angle

Adjust the angle as desired.
Note:
R When adjusting the angle,
make sure the unit does not tip
over.
A A
B B
2018/03/02 14:18:13