Figure 2-32 Build Configuration File - Assign 1St Server Address; Figure 2-31 Build Configuration File - Select Server Ip Address/Server Port - NEC UX5000 Resource Manual

UX5000 IP Terminal AutoConfig Setup
Basic settings needed to
get the telephone working:
1. 1st Server Address
2. 1st Server Port
Assign the IP Address
(programmed in 10-12-09)
to the 1st Server Address.
Assign port 5080 to the
1st Server Port.
Figure 2-31 Build Configuration File – Select Server IP Address/Server Port
1
2
3
Figure 2-32 Build Configuration File – Assign 1st Server Address
2 - 28 IP Terminal AutoConfig Setup