NEC UX5000 Resource Manual page 38

1 - 26
After specifying the options in the window, click the Download button.
Once the download has completed, the status changes from "OK" to
"Complete". To perform additional actions for these terminals you must
reconnect to the terminals by clicking on the Connect button on the main
page as the terminals are reset and the connection is dropped.
If an "Error" status is displayed, reconnect the terminal(s) as the connection
may have been lost. A status of "Failed" could indicate an incorrect setting for
the FTP/TFTP Server or the server is down. The other option for a "Failed"
status could be that the download file was not a correct file.
With a Failed or Error status, the connection to the terminals is dropped and
you should reconnect to the terminals by clicking on the Connect button on
the main page.
If a status of "Download N/A" is displayed, the terminal is busy and the
command is not performed and should be attempted again after the terminal
has had a chance to finish. If the Send Until Successful option was selected,
the command will be sent when the terminal becomes idle.
FTP/TFTP Server:
1. Select the type of server - FTP or TFTP.
2. Define the IP address of the server.
3. Enter the User ID.
For FTP Only:
4. Enter the Password.
For FTP Only:
5. Enter the Directory name.
For FTP Only:
UX5000 IP Phone Manager
IP Phone Manager