10.2
7 - 22
Terminal Setup
1. Press the MENU button on the terminal.
2. Press the Setting icon.
3. Press User Setting or press 1 then press Display or press 3.
4. Press Screen Saver or press 3. Then, select either Screen Saver Mode
or Wait Time. Use the Screen Saver Mode menu to enable or disable the
Screen Saver feature (disabled by default). Use the Wait Time to set the
amount of time before the Screen Saver displays (120 minutes by default).
5. Make the required changes, then press the Back Soft Key to exit out.
UX5000 IP Terminal Features
IP Terminal Features