Figure 2-20 Manual Version Entry - NEC UX5000 Resource Manual

2 - 16
6. New – return to the Home Screen to create a new configuration
file.
7. Open – Allows user to open an existing file.
8. Close – Ends the Auto Config Setup Application session.
9. Save – Save the current open file to a desired location.
10. Data Restore – Restores Modified Data settings to previous saved
or default entries. The Data Restore dialog box appears only when
a single configuration file is created.

Figure 2-20 Manual Version Entry

UX5000 IP terminals use the Version revision number to compare
✎
internal terminal file and FTP server file versions during the Plug-and-
Play process. If the terminal does not have the same version number as
the stored FTP server, the terminal will download the FTP
configuration file version.
The version number will automatically be updated when a file is
✎
modified or the version number can be entered manually. If the terminal
loads an AutoConfig file that has the same version as a previously
loaded AutoConfig file, the data will not be updated. Therefore, be sure
to update the file version when creating a new file.
UX5000 IP Terminal AutoConfig Setup
IP Terminal AutoConfig Setup
Manual
Entry