Figure 1-16 Command Drop-Down List - NEC UX5000 Resource Manual

UX5000 IP Phone Manager
5.2
UX5000 IP Resource Manual
Reset
The Reset function will reset the terminal(s) to which the IP Phone Manager is
connected. There are two options for resetting the connected terminal(s):
Soft Reset – Application layer of the terminal
Hard Reset – Full hardware initialization of the terminal
Click on the check box for the terminal(s), select the Reset option from the
Command drop-down list, and click the Execute button.

Figure 1-16 Command Drop-Down List

Select to perform a Soft Reset or Hard Reset from the radio button options.
Select the Command Transmit to use (Send Once, Immediately or Send
Until Successful - see page 1-14) and click Execute.
The status changes from "OK" to "Soft ResetOK" or "Hard ResetOK".
1 - 19