Watching a DVD/Blu-ray Disc
• Refer to the operating
instructions supplied with the
TV and DVD player or Blu-ray
• Check the following if you
cannot listen to the multi
– Be sure the sound source
corresponds to the multi
channel format (the MULTI
lamp on the front panel lights
up during playback).
– Be sure this receiver is
connected to the DVD player
or Blu-ray disc player via a
– Be sure the digital audio
output of the DVD player or
Blu-ray disc player is set up
• Select the sound format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie or the music. See
page 63 for details.
MULTI CHANNEL DECODING lamp
Turn on the TV and DVD player or Blu-ray
Turn on the receiver.
Press INPUT SELECTOR U/u to select "DVD"
You can also use INPUT SELECTOR on this receiver to
select "DVD" or "BD".
Switch the input of the TV so that an image
of the DVD or Blu-ray Disc is displayed.
Play back the disc.
Adjust to a suitable volume.
After you have finished watching a DVD or
Blu-ray Disc, eject the disc and turn off the
receiver, the TV, and the DVD player or Blu-
ray disc player.