HP ElitePOS G1 Disassembly Instructions Manual page 51

Document No. Nantucket bezel Air bonding DIS SOP
Name :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard)
Heat the disassembly equipment
Tabulator：
Uen-Tung
Standard Operation Procedure
Disassemble Glass
Auditor ：Uen-Tung
Ver. :
Step：
1. LCM module puts into Nantucket to heat to
heat in the disassembly equipment
Note：
• Time：5Min
• Heat the temperature：80±5℃
Fig.1
Qty
Holding fixture list (holding fixture standard)
1
Station :
1.0
Date
Issue department：
9(1/1)
2017/6/5
:
Qty
NPSU-PPE