Testing your Solo System
For Mobile Device Light Indicator information, please see page 35.
Press and hold the TEST button on Mobile Device (the button on the side
■ ■
with the letter "T"). (Please refer to figure 9)
- You will hear an announcement over the Mobile Device that will instruct
you to press the Emergency Button or Pendant.
- Press the Neck Pendant, Wrist Button OR the Emergency Button on the
Mobile Device.
- The Mobile Device will announce "test call sent to Emergency Response Center."
- If your test was successful, you will hear "thank you for testing your device" from
the Mobile Device.
If the help button on your Mobile Device is not working properly or if the light is blinking
■ ■
rapidly, please call 1-877-827-6207 and select Technical Support.
Please remember, it is important to test your SOLO system monthly.
MHP8003-386B
MobileHelp Complete User Guide
CompleteUserGuide_CBS_4_MD_4_MHP8003-386B_mech.indd 19
TEST Button
Emergency
Button
Figure 9
19
4/2/2019 2:06:53 PM
Need help?
Do you have a question about the Cellular Duo System and is the answer not in the manual?