MobileHelp Cellular Duo System Complete User Manual page 12

Step 3. Turning ON your Base Station
Turn on your Base Station using the ON/OFF switch located on the back.
■ ■
(Please refer to figure 5)
The display screen will turn on. (Please refer to figure 6)
■ ■
The Emergency and Reset Buttons will illuminate.
■ ■
If the Base is setup correctly, the Base Station will say "system ready" within 60 seconds.
■ ■
Make sure your Base Station is connected to the cellular network by checking for the
■ ■
signal strength bars on the display screen.
You can use the volume control buttons on the front of the unit at the bottom of the display
■ ■
screen, indicated by the "–" or the "+" sign, to adjust if the voice is too loud or too soft.
Within a few minutes of turning on the system, the Cellular Base Station will obtain the
■ ■
date and time from the cellular network and they will appear in the display area. You are
not able to set the date and time manually.
ON/OFF
Switch
Figure 5
12
CompleteUserGuide_CBS_4_MD_4_MHP8003-386B_mech.indd 12
(01)00862262000453(11)170623(21)1234
Model Number: CBS4-01 FCC ID: PXTCBS4-01
IC ID: 10876A-CBS401
This product contains;
CAN ICES-3(B)/NMB-3(B)
Module FCC ID:XPY1EHQ24NN
Module IC ID: 8595A-1EHQ24NN
Manufactured For MobileHelp
Made in Malaysia
MobileHelp Customer Service 1-877-827-6207
Figure 6
MHP8003-386B
4/2/2019 2:06:52 PM