Page 3
Fall Detect System Features Fall Detect System Features Multi-color indicator Emergency Help Button Technical Support use only MHP-06842A FallDetect_UserGuide_MHP8002-009H_05mech.indd 3 2/5/2019 10:28:00 AM...
Page 4
Welcome Thank you for choosing The Fall Button Automatic Fall Detect Pendant will trigger a ™ signal for help, even if you can't speak. The Fall Button Device. It ™ has all of the features of the standard Help Buttons, allowing you to send an Emergency Button.
Page 5
If you have any questions, please call Technical Support. MHP-06842A FallDetect_UserGuide_MHP-06842A_05mech.indd 5 2/5/2019 10:28:00 AM...
Page 6
Testing The Fall Detect Button Please have the complete system near you at the time of testing. Press the Fall Detect MHP-06842A FallDetect_UserGuide_MHP-06842A_05mech.indd 6 2/5/2019 10:28:00 AM...
Testing Fall Detection Fall detection can be tested by dropping the Fall Button from a height of 3 feet. The Fall Detect Button can take up to 20 seconds to interpret the movement and determine if an actual fall Please do not pick up the pendant before the test is completed, as it may interpret this as normal movement and cancel the test.
Important Safety Information The Fall Detect Button does not detect 100% of falls. If you are able, please press the Help Button when you need assistance. The Fall Detect Button will work approximately 300 feet from the Mobile Device or 600 feet from the Base - To prevent the Fall Detect Button from accidentally activating while you sleep, please shorten the length of your lanyard so that the pendant rests at chest level.
Page 9
Fall Detect Button Light Indicator No alarm detected Flashes once Button has been pressed or a fall is detected Flashes once Alarm has been cancelled Amber Pendant is low on battery MHP-06842A FallDetect_UserGuide_MHP-06842A_05mech.indd 9 2/5/2019 10:28:00 AM...
Page 10
If the alarm is not cancelled manually after this time, the alert is sent to the Emergency Response the button if you need help, as the Fall Button does not detect 100% of falls. MHP-06842A FallDetect_UserGuide_MHP-06842A_05mech.indd 10...
Page 11
If the alarm is not cancelled, an Emergency Operator will communicate with you through the Base Will my Fall Detect Button work outside my home? Yes, the Fall Button Automatic Fall Detect Button works outside of the home, as long as it is within range of the Mobile Device.
Page 12
The battery can last up to 18 months. The visual indicator will flash amber, briefly, every few minutes, to indicate a low battery. If this occurs, please contact Technical Support. When a low battery alert is received from the Fall Button, a replacement will be shipped to you at no charge.
Page 13
Is the lanyard breakaway? Yes, with a tug the lanyard will break away. If I accidentally set off the Fall Detect alarm, what do I do? no further action will be taken. Can I replace the Neck Pendant cord? chains or necklaces. However, the risk of choking may increase if you do not use the lanyard provided Can I speak into my Fall Detect Button? Is the Fall Detect Button waterproof?
FCC Statement against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Technical Information 1.5 A Battery Backup 1.5 A Internal 930 mAh Internal 1200 mAh Internal 230 mAh Internal 230 mAh Internal 230 mAh 1000 mA 3000 mA Battery Backup 3000 mAh 3000 mA Battery Backup 3000 mAh Internal 930 mAh Internal 1000 mAh 3000 mA...
Need help?
Do you have a question about the Fall Button and is the answer not in the manual?
Questions and answers