Testing your Cellular Classic System
Please test your system on a weekly basis using the TEST button.
You can use the TEST button on your Cellular Base Station to conduct a test without speaking
■ ■
to an Emergency Response Operator by following these steps:
- Press and hold the TEST button on Base Station until it illuminates green.
- You will hear an announcement over the Base Station that will instruct you to press the
Emergency Button or Pendant.
- Press the Neck Pendant or Wrist Button.
- The Base Station will announce "test call sent to Emergency Response Center".
- If your test was successful, you will hear "thank you for testing your device" from the
Base Station speaker.
- If your test was not successful, the Base Station will announce "user auto-test failed."
Please contact Technical Support.
The Base Station contains a battery backup. If you would like to test the battery
■ ■
backup capability, please unplug the power for the Cellular Base Station from the
AC outlet. Then follow the testing steps above. Once you have finished testing,
please remember to plug the power back into the AC outlet.
18
CompleteUserGuide_CBS_4_MD_4_MHP8003-386B_mech.indd 18
MobileHelp Customer Service 1-877-827-6207
MHP8003-386B
4/2/2019 2:06:53 PM
Need help?
Do you have a question about the Cellular Duo System and is the answer not in the manual?