Agilent Technologies 93000 SOC Series Training Manual page 449

1. Activate this button.
2. Fill these areas.
Set testsuite name, vector label,
and primary set numbers of various data
Testsuite Dialog
Then, place the cursor in the test method entry box at the bottom
5
of the testsuite dialog, and click the Select button. A selection box
dialog shown in the following figure appears.
Cursor
Selection Box Dialog
Select the desired class from the list in the selection box dialog.
6
Highlight the desired method in the Method window in the
selection dialog. For names combined with ' ' (space), the selected
class and method will be displayed in the test method entry box.
Lesson 2 – Creating a Test Method
4. Click Select button.
3. Place cursor in testmethod entry box.
449