Harmonics Window
You can enter the fundamental frequencies to be used for the
calculation, and you can specify the amount of data to be
calculated.
H
: Five checkboxes to specify the kind of results to be
•
ARMONICS
calculated.
F
: Ten boxes where you can enter up to 10
•
UNDAMENTALS
frequencies that form the basis of the calculations.
The calculated harmonic frequencies are shown in the F
column of the Harmonics window.
Calculated Harmonics Example (2-Tone Signal)
Lesson 7 – Executing the DAC Distortion Test
(
)
REQ
UENCY
285