Agilent Technologies 93000 SOC Series Training Manual page 237

Lesson 5 – Waveform Generation with the Mixed-Signal Tool
There are four tools for generating a waveform, as shown above.
The Binary option is a special for testing of LAN devices.
With the Marker option you can define a two level signal. Such a
signal can be generated by the WGC in addition to the waveform
output. The level transitions of the signal can be synchronized
with specific sample points of the generated waveform. For
example, this can be used for any kind of triggering that is coupled
with a particular point of the generated waveform.
All these tools show the generated waveform in the Generated
Waveform display area.
How to Use the Waveform Editor Tool
The Waveform Editor tool requires that you enter parameters
which describe the desired waveform.
Waveform Editor Input Window
A waveform consists of an AC component, offset, and phase. The
following figure illustrates the meaning of the waveform
description parameters:
237