BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual page 99

NOTICE
Never untighten the nut
to align the RED locking clip hole.
Tighten the nut to the nominal value,
then tighten further to align the hole.
rbs2019-004-005a
1. Folded end pointing inside the drive axle
rbs2019-004-008a
Remove locking device from the wheel
hub.
219001998-158
1
_______________
MAINTENANCE PROCEDURES
Rear Wheel
Removing the Rear Wheel
1. Place the vehicle on a level surface.
2. Move the park position lever in the
locked position.
3. Remove the RED locking clip.
rbs2019-004-006a
4. Loosen the center lock wheel nut.
219001998-200
1. RED locking clip
2. Center lock wheel nut
REQUIRED TOOL
65MM SOCKET
(P/N 529 036
457)
5. Lift and support the rear of the vehi-
cle.
97