BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual page 119

219001998-106
1. Front fascia lower strip
2. Radiator support
2. Tilt the top of the front fascia against
the vehicle.
219001998-107
3. Roll up both ends of the front fascia
extensions.
219001998-553
4. Insert the upper alignment posts in
upper frame slots.
1
219001998-108
LH SIDE SHOWN
1. Upper alignment post
2. Upper frame slot
5. Release both ends of the front fas-
cia extensions. The retaining tabs
should be located under the upper
frame.
6. Push the front fascia in place.
7. Ensure front posts are properly in-
serted into rubber grommets.
219001998-109
1. Front posts
2. Rubber grommets
8. Install screws located underneath
the front fascia.
______________
MAINTENANCE PROCEDURES
2
117