BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual page 28

EQUIPMENT
219001998-157
After the adjustment of the footpegs
and the brake pedal, BRP recommends
that the driver seats on the vehicle in
driving position to determine if the po-
sition is the most adequate and the
most comfortable. The driver must
also check if the brake pedal goes all
the way through its operating travel.
Left Side Footpeg
WARNING
Make sure the engine is turned
off and the engine stop switch is
on the STOP position before per-
forming an adjustment on a con-
trol component.
1. With the engine off, lift the footpeg
completely.
219001998-023
2. Slide the footpeg forward or rear-
ward to the desired position.
______________
26
219001998-024
3. Lower the footpeg in its position for
the driving.
Right Side Footpeg and Brake Pedal
WARNING
Make sure the engine is turned
off and the engine stop switch is
on the STOP position before per-
forming an adjustment on a con-
trol component.
1. Lift the footpeg completely.
219001998-560
2. Slide the footpeg and the brake
pedal forward or rearward to the
desired position.