BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual page 129

8. Start your vehicle in the usual way; if
the engine does not start, wait a few
minutes before repeating the at-
tempt in order to protect the starter
motor and the booster battery.
NOTE: If it still does not start, there
might be a problem with the starting
system. Have the vehicle transported
HOW TRANSPORTING THE VE-
(see
HICLE
in this section) and repaired by
an authorized Can-Am On-Road dealer.
9. Once the vehicle has been started,
let run both engines to idle for a few
minutes before disconnecting the
jumper cables.
10. Remove the jumper cables in the
reverse order that they were con-
nected.
NOTE: If the engine dies shortly after
it has been jump started or when the
jumper cables are disconnected, there
might be a problem with the charging
system. Have the vehicle transported
HOW TRANSPORTING THE VE-
(see
HICLE
section) and repaired by the an
authorized Can-Am On-Road dealer.
11. Have the battery fully recharged
with a battery charger (see
TENANCE PROCEDURES
qualified service station as soon as
possible.
WHAT TO DO IN THE FOLLOWING CIRCUMSTANCES
MAIN-
) or by a
______________
127