BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual page 103

Changing the Engine Oil and Oil
Filter
CAUTION The engine oil can
be very hot. Wait until engine oil is
warm.
NOTICE
Engine oil and oil filter
must be replaced at the same time.
1. Bring engine to its normal operat-
ing temperature (90°C (194°F) at oil
tank surface).
NOTE: The engine is at normal oper-
ating temperature when the tempera-
ture indicator on the right lateral display
shows 5 bars.
RTXM-3MY19-003-300
2. Place vehicle on a level surface.
3. Open the right service cover.
4. Remove dipstick.
219001998-057
5. Clean drain plug area.
6. Place a drain pan under the engine.
7. Remove engine drain plugs in the
following order.
1. Magnetic drain plug
2. Secondary drain plug.
RTXM-2MY19-003-005_a
600 ACE ENGINE
1. Magnetic drain plug
2. Secondary drain plug
RTXM-2MY19-003-006_a
900 ACE ENGINE
1. Magnetic drain plug
2. Secondary drain plug
8. Allow oil to drain completely.
During this time, replace the engine oil
filter.
9. Remove the front service cover. Re-
fer to
10. Clean the engine oil filter area.
11. Remove the oil filter cover.
______________
MAINTENANCE PROCEDURES
SERVICE COVERS
.
101